The Z334 is a bench-top system for cup height analysis.


Each cup to be inspected is manually loaded into the gauge and the measurement cycle is initiated via the PC running the TMS GaugeXplorer measurement and machine control software. Setup screens allow the operator to enter traceability information and select the number of samples and heads from which data is to be collected.

Once the component has been measured, the operator may visually accept or reject the software’s calculated ‘peaks’ and ‘troughs’, which will be used in the Earring calculations.


Torus Beverage Can Gauging


Measurement Features

  • Min. Cup Height
  • Average Cup Height | Accuracy: +/- 0.050 mm
  • Range Cup Height
  • % Earring
  • Paired Earring


Technical Specification

  • Cup Material | Aluminium, Steel
  • Cup Stages | Cups
  • Cup Height Range | Typical Range: 22 – 46 mm
  • Cup Body Diameter Range | Typical Range: 76 – 115 mm
  • Compact, bench-top design
  • Measurements are performed using a single Digital Contact Transducer and Motorised Component Rotation through a full 360º
  • A range of component location rings and anti-ovality inserts may be supplied for various cup diameters

Torus Recommends

Our Divisions

Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

How can we help you?