Each shell to be inspected is automatically collected from a ‘stack’ and loaded into the gauging module with an integrated pick and place system. The measurement cycle is then initiated via the PC running the TMS GaugeXplorer Measurement and Machine Control software.
| Feature | Accuracy |
|---|---|
|
Unit Depth |
+\- 0.005 mm |
|
Countersink |
+\- 0.005 mm |
|
Panel Depth |
+\- 0.005 mm |
|
Curl Diameter |
+\- 0.005 mm |
|
Curl Height |
+\- 0.005 mm |
|
Curl Opening* |
+/- 0.025 mm |
|
Inner Curl Diameter |
+/- 0.025 mm |
|
Average Metal Thickness |
+/- 0.005 mm |
*Curl Opening feature not supported on CDL style shells
| Capabilities | Typical Range |
|---|---|
|
Shell Materials |
Aluminium |
|
Shell Stages |
Pre-Curl, Form, Finished |
|
Shell Body Diameter Range |
Ø 200 - Ø 206 |
The Torus Measurement Systems modular design construction gives complete flexibility when specifying your requirements.
The below option Automatic Grain Alignment is available to add at anytime.
The Grain Alignment option allows operators to gain information of where exact measurement points are taken, allowing for precise tooling adjustment to be made when required.
Explore the services we offer below to find out how we can help you
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
