The Torus Measurement Systems Manual Benchtop 2 Piece Specialised Food Can Gauge has been specifically designed for the measurement of body dimensions of specialised cans.
Designed with flexibility in mind, this gauge can be suitable for a range of different food can products upon request.
The gauge is manually loaded, unloaded and operated.
Utilising the latest Torus GaugeXplorer measurement and machine control software.
Torus Food Can Gauging
Measurement Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z340 Semi-Automatic Bench Top Coating Analyser has been developed to give detailed distribution analysis of the internal and external lacquer on an aerosol can.
The system utilises state-of-the-art non-contact spectroscopy techniques and is suitable for both aluminium and steel aerosol can inspection.
Measurement Features
Technical Specification
Gauge Features
The Z340 Semi Automatic Aerosol Can Coating Analyser 
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z307 Semi-Automatic Bench Top Axial Load Gauge determines the maximum axial load force that can be applied prior to container failure within a short cycle time.
The test will begin once top tooling has detected the start of the axial load via the high accuracy mapped load cell, gathering accurate data throughout the inspection routine. Once the can sample has reached the buckle/column strength maximum achievable load, the result will be shown on screen and exported as necessary.
Measurement Features
Axial Load – The maximum force at which the container fails/collapses | Accuracy: +/- 10 N
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z341 Manual Coating Analyser has been developed to give fast and accurate measurement of the internal lacquer, sprayed during today’s 2 piece can manufacturing process
By cutting the can to give suitable access, the dome area of the can is able to be checked by the system.
No “lacquer panels” are required for calibration and measurement data can be exported via on board USB or LAN ports to your factory data acquisition systems where required.
Measurement Features
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z307 Semi-Automatic Bench Top Axial Load Gauge determines the maximum axial load force that can be applied prior to container failure within a short cycle time.
The test will begin once top tooling has detected the start of the axial load via the high accuracy mapped load cell, gathering accurate data throughout the inspection routine. Once the can sample has reached the buckle/column strength maximum achievable load, the result will be shown on screen and exported as necessary.
Torus Food Can Gauging
Measurement Features
Axial Load – The maximum force at which the container fails/collapses | Accuracy: +/- 10 N
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z341 Manual Coating Analyser has been developed to give fast and accurate measurement of the internal lacquer, sprayed during today’s 2 piece can manufacturing process
By cutting the can to give suitable access, the dome area of the can is able to be checked by the system.
No “lacquer panels” are required for calibration and measurement data can be exported via on board USB or LAN ports to your factory data acquisition systems where required.
Torus Food Can Gauging
Measurement Features
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
Introducing Torus’ Z704 RemoteXplorer, offering remote visual global support from our head office
Remote support has been available for many years via Torus’ global helpdesk team, but only now can ‘eyes on’ support be offered via a new extension of Torus’ traditional GaugeXplorer software. RemoteXplorer, with the permission of customers, the gauges can now be monitored visually using RemoteXplorer’s newly developed pan and tilt camera system and software package.
Our Divisions
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
How can we help you?
Using Industry standard database platforms, SPCXplorer is suitable for single station application, through to full factory database-centric network installations.Statistical Process Control (SPC) software is essential for manufacturing wide quality monitoring.
Upgrade Existing SPC Software Systems
With our database migration tools and backward compatibility architecture, users of the previous generation Repro2000 statistical process control software can upgrade with minimal disruption to their daily operation.
Designed with the needs of shop-floor data collection in mind, SPCXplorer can be interfaced to a large variety of manual instrumentation via RS232 connectivity, or for more complex gauging systems, can process bespoke ASCII data files via Ethernet.
The Reporting module ensures the data is displayed in the right format for your quality reviews, and with its simple and powerful administration functions, access to the management and configuration areas of the software is password protected for assured security.
Reliable & Professional SPC Software for Industry – SPCXplorer
Statistical Process Control software helps prevent business relative issues before they occur, via the use of data driven quality analysis. This enables you to monitor your production process by utilising visual diagrams such as Control Charts, customers have the ability to create specific control boundaries for all of their process monitoring needs. SPCXplorer detects manufacturing issues before they occur.
Using statistical process control software and knowing how efficient your processes are running, helps give the operators valuable information on whether to instigate or adjust their manufacturing processes or whether to carry on with the current process.
Want to know more about our SPC software? Contact us today.
Our Divisions
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
How can we help you?
GXP software is fundamental to all Torus Measurement Systems gauges, providing smooth reliable gauge operation, including state of the art intuative diagnostic tools, allowing the operators and our TMS support team easy access to the gauge where ever in the world you are.
GXP software has a range of features for your specific industry requirements to help improve productivity & meet quality requirements.
Our Divisions
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
How can we help you?
The B300 Manual Thickness Inspection Gauge has been developed to provide a simple solution to single sided thickness measurement on plastic components
Using state-of-the-art optical white light technology for rapid, non-contact reliable inspection, the system takes advantage of a live and continuous measurement mode enabling quick thickness checks without the requirement for batch setup. The system has been integrated into a small bench top footprint, allowing for ease of transportation around production facilities within a suitable transportation or flight case.
Reporting options as standard CSV or Statistical Process Control (SPC).
Traceability and Certification to UKAS Standards.
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Beverage Can Master supplied with your gauge is extremely important for the reliability of your measurement results.
As the original equipment manufacturer Torus Measurement Systems recommends that your Master is re-calibrated annually to continually assess for wear, damage and integrity. This ensures your product quality is never compromised.
Torus are a leading manufacturer in gauging systems for the packaging industry worldwide, with the expertise to understand the functionality and critical features of your master.
Torus Measurement Systems Master Calibration Service offers:
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z703 works together and compliments Torus’ Z340 Coating Analyser range to provide base rim coat distribution inspection analysis and quickly identifies the application of UV base rim coat presence, indicating in split seconds a percentage coverage based on parameters set within Torus’ GaugeXplorer software. The Iive report instantly denotes if the rim coat has either been under applied or damaged.
Torus Beverage Can Gauging
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z346 is capable of inspecting 202-300 body diameter, straight walled and finished cans with minimal change parts. Providing direct correlation to Torus’ Z345 Automatic Colour Inspection System, the Z346 boasts an easy to use platform for the inspection of multiple decorations, giving you direct data transfer into your chosen SPC package.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z341 Manual Coating Analyser has been developed to give fast and accurate measurement of the internal lacquer, sprayed during today’s 2 piece can manufacturing process
By cutting the can to give suitable access, the dome area of the can is able to be checked by the system.
No “lacquer panels” are required for calibration and measurement data can be exported via on board USB or LAN ports to your factory data acquisition systems where required.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z340 Semi-Automatic Bench Top Coating Analyser has been developed to give detailed distribution analysis of the internal and external lacquer on a beverage can
The system utilises state-of-the-art non-contact spectroscopy techniques and is suitable for both aluminium and steel can inspection.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Gauge Features
Start with the standard Z340 Semi-Automatic Bench Top Beverage Can Coating Analyser…
… add any of the below detailed optional modules at any time
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z338 Manual Front End Gauge has been designed to measure typical features for Front End Inspection including; Trimmed Can Height, Mid and Top Wall Thickness and Dome Depth.
Whether being used at the front end for body maker setup checks, in the quality area for off-line inspection, or as a backup during routine maintenance for your automatic gauges, exact correlation gives you 100% confidence in your process.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z334 is a bench-top system for cup height analysis.
Each cup to be inspected is manually loaded into the gauge and the measurement cycle is initiated via the PC running the TMS GaugeXplorer measurement and machine control software. Setup screens allow the operator to enter traceability information and select the number of samples and heads from which data is to be collected.
Once the component has been measured, the operator may visually accept or reject the software’s calculated ‘peaks’ and ‘troughs’, which will be used in the Earring calculations.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The gauge is designed to ensure correlation with the Z302 series inspection system by utilising common measurement principles and instrumentation
Each component is manually loaded by the operator and orientated to the required position for measurement. All features are simultaneously checked at each position, allowing a typical can inspection in under 30 seconds.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
Designed specifically for 2 piece can manufacturers who “reform” their cans, this small inspection gauge gives critical measurement information on the setup of each head of your reformer
The scanner utilises proven contact measurement technology to scan the form of the reformed profile and incorporates a entering check to accurately locate Ø 202 – Ø 300 body cans.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
The Z308 Dome Reversal Gauge provides detailed information about the overall change in length of the can when pressure is applied and subsequently removed.
Torus Beverage Can Gauging
Measurement Features
Technical Specification
Gauge Features
Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.
