Z335 MANUAL BENCHTOP 2 PIECE SPECIALISED FOOD CAN GAUGE
Z335 MANUAL BENCHTOP 2 PIECE SPECIALISED FOOD CAN GAUGE

Blog Archives


Z335 MANUAL BENCHTOP 2 PIECE SPECIALISED FOOD CAN GAUGE

Z335 MANUAL BENCHTOP 2 PIECE SPECIALISED FOOD CAN GAUGE

The Torus Measurement Systems Manual Benchtop 2 Piece Specialised Food Can Gauge has been specifically designed for the measurement of body dimensions of specialised cans.

Specifications

Designed with flexibility in mind, this gauge can be suitable for a range of different food can products upon request.

The gauge is manually loaded, unloaded and operated.

Utilising the latest Torus GaugeXplorer measurement and machine control software.

 

Torus Food Can Gauging

Food Cans-01

Measurement Features

  • Factory Finished Can Height – Measured at 4 fixed positions | Accuracy: +/- 0.0127mm
  • Flange Width (sides) – Measured at 4 fixed positions | Accuracy: +/- 0.0127mm
  • Bottom Panel Depth – To be measured at 2 fixed positions | Accuracy: +/- 0.0127mm
  • Bead Depth – To be measured at 4 fixed positions | Accuracy: +/- 0.0127mm
  • Short Side Bead Depth | Accuracy: +/- 0.0127mm

 

  • Specifically reduces labour time
  • Increases operator productivity
  • Overcomes human error and operator bias
  • Compact bench top design makes the unit easy to manage and move
  • Direct data transfer to customer SPC package

Torus Recommends

Our Divisions

Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

How can we help you?

    Z601 AUTOMATIC FOOD END EOE PROGRESSION GAUGE

    Z601 AUTOMATIC FOOD END EOE PROGRESSION GAUGE

    The Z601 Automative EOE Progression Gauges sets the standard for inspecting all standard and enhanced inspection features across all conversion types.

    Specifications

    The non-contact technology gives the operator the reassurance that no influence or bias has occurred during measurement, giving you full confidence in your production process.

     

    Torus Shells and Ends

    Beverage Shells and Ends

     

    Technical Specification

    • Component Materials | Aluminium/Steel
    • Component Stages | Full conversion stages
    • Component End Range | Typical Range: Ø 200 – Ø 307

     

    Features (Standard Features)

    • Bubble/Button Height(s) | Accuracy: +/- 0.010 mm
    • Bubble/Button Thickness | Accuracy: +/- 0.002 mm
    • Bubble/Button Coin | Accuracy: +/- 0.004 mm
    • Metal Thickness | Accuracy: +/- 0.002 mm

     

    Features (Enhanced Features)

    • Heights | Accuracy: +/- 0.010 mm
    • Depths | Accuracy: +/- 0.010 mm
    • Positions | Accuracy: +/- 0.025 mm

     

    • All conversion types supported
    • Live data transfer to customer specific SPC package
    • Standard feature cycle time <4 minutes per full progression
    • Enhanced feature cycle time <8 minutes per full progression
    • Fully automated so no change of parts
    • Easy to load adjustable cassettes (Ø 200 – Ø 307) for inspection (48 ends per stack)

    Standard Measurement Features include:

    • Bubble Height
    • Bubble Head Thickness
    • Bubble Coin
    • Metal Thickness
    • Primary Button Height
    • Primary Button Thickness
    • Secondary Button Coin

    Enhanced Measurement Features include:

    • Tab Support Bead Height
    • First Panel Depth
    • Stacking Bubble Height
    • Score Position at Tab Nose
    • Panel Profile Depth

    Torus Recommends

    Our Divisions

    Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

    How can we help you?

      Z401 AUTOMATIC FOOD SHELL INSPECTION GAUGE

      Z401 AUTOMATIC FOOD SHELL INSPECTION GAUGE

      The Z401 Shell Inspection System from Torus Measurement Systems defines the standard for dimensional inspection of food can shells.

      Specifications

      Each food shell to be inspected is automatically collected from a ‘stack’ and loaded into the gauging module with an integrated pick and place system. The measurement cycle is then initiated via the PC running the TMS GaugeXplorer Measurement and Machine Control software.

       

      Torus Shells and Ends

      Beverage Shells and Ends

       

      Measurement Features

      • Overall Height | Accuracy: +\- 0.015 mm
      • Metal Thickness | Accuracy: +\- 0.007 mm
      • Outer Diameter | Accuracy: +\- 0.015 mm
      • Countersink Depth| Accuracy: +\- 0.015 mm
      • Curl Height | Accuracy: +\- 0.015 mm

       

      Additional Features (upon request)

      • Curl Opening | Accuracy: +\- 0.030 mm
      • Inner Curl Diameter | Accuracy: +\- 0.030 mm
      • Panel Depth | Accuracy: +\- 0.010 mm

       

      Line Scan Laser Features (optional upgrade)

      • Panel Profile | Accuracy: +\- 0.030 mm

       

      Technical Specification

      • Shell Materials | Aluminium/Steel
      • Shell Stages | Pre-Curl, Form, Finished
      • Size config. 1 | 100-200
      • Size config. 2 | 200-211
      • Size config. 1 | 307-603

       

      • Fast and accurate measurement data
      • No change parts
      • Can be supplied for a single-fixed diameter of food shell, or for facilities producing multiple sizes (Please refer to the size config. table above). A fully automatic adjustable version is available.
      • Operator can define which features are inspected at up to 16 selectable positions
      • Pre-curl and finished shells can be measured with no mechanical changeover
      • Hopper type handling system, one or two load/unload hopper cassettes (stack of shells up to 98mm height)

      Automatic Grain Alignment

      The grain alignment option allows operators to gain information of where exact measurement points are taken, allowing for precise tooling adjustment to be made where required.

      Line Scan Laser Features (Optional upgrade)

      Panel Profile, including:

      • Bead Pitch
      • Bead Spacing and Depth
      • Panel Profile Depth
      • First Panel Depth
      • First Bead Height
      • Panel Bead Diameter

      Torus Recommends

      Our Divisions

      Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

      How can we help you?

        Z604 AUTOMATIC FOOD SHELL AND END ENAMEL RATER

        Z604 AUTOMATIC FOOD SHELL AND END ENAMEL RATER

        Our Z604 Automatic Food Shell and end Enamel Rater offers unprecedented functionality and capability for today’s global shell/end-making industry.

        Specifications

        By monitoring critical manufacturing parameters over time and relating the press performance to the change in the ends opening signature, the manufacturing process capability can be observed. This trend monitoring is extremely beneficial to the process engineer, in predicting potential out-of-spec score residual and other critical features. By sampling ends from the production line, the Opening Force Gauge can monitor tooling wear in real-time and provide significant savings in both labour and scrap.

         

        Torus Shells and Ends

        Beverage Shells and Ends

         

        Measurement Features

        • Metal Exposure (mA) | Accuracy: +\- 0.1mA (@ 0-100 mA range)

         

        Technical Specification

        • Shell Materials | Aluminium/Steel
        • Component Stages | Shells, Converted Ends (Lined and Unlined)
        • Shell Diameter Range | Typical Range: Ø 211 – Ø 307
        • Option of 1-3 stations for up to 3 sizes/types at one time with no change parts
        • Batch interrupt facility
        • Both shell and converted end inspection
        • In-cycle “conductivity” monitoring and industry standard 4 second mA check
        • Automatic electrolyte recycling and monitoring
        • 4 shells / ends per minute
        • Adjustable multi-size loading and handling system

        Once the part program is selected, the operator will be prompted to load the hopper system as instructed, a maximum of up to 100 shells / ends per hopper (maximum of 4 hoppers per gauge)

        The samples can be collected from the production lines and batch loaded at any given time without cancelling the current batch inspection sequence, resulting in increased sample testing frequency.

        The gauge will then automatically start the test cycle using the industry standard 4 second procedure.

        Torus Recommends

        Our Divisions

        Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

        How can we help you?

          Z403 AUTOMATIC FOOD SHELL COMPOUND WEIGHT AND PLACEMENT GAUGE

          Z403 AUTOMATIC FOOD SHELL COMPOUND WEIGHT AND PLACEMENT GAUGE

          The Z403 Automatic Compound Weight and Placement Gauge has been designed to reduce the significant labour time associated with manual compound weight and placement checks, whilst also reducing the risk of human error in this manually labour intensive process.

          Specifications

          By adopting a similar strategy to the existing manual process, Torus have incorporated state of the art printing technology to label each shell with specific information related to the module, liner, sample, date and time.

           

          Torus Shells and Ends

          Beverage Shells and Ends

           

          Measurement Features

          • Compound Weight | Accuracy: +/- 0.4 mg | Repeatability: 1.0 mg
          • Pre-lined Weight | Taken from post-lined weight to give compound weight
          • Post-lined Weight | Pre-lined weight taken from this to give compound weight
          • Average Cut Edge Distance (360º) | Accuracy: +/- 0.05 mm | Repeatability: +\- 0.1 mm
          • Average High on Shoulder (360º) | Accuracy: +/- 0.05 mm | Repeatability: +\- 0.1 mm
          • Average Compound Bandwidth (360º) | Accuracy: +/- 0.05 mm | Repeatability: +/- 0.1 mm

           

          Technical Specification

          • Shell Materials | Aluminium
          • Component Stages | Shells
          • Shell Diameter Range | Typical Range: Ø 211 – Ø 307
          • Option of 1-5 stations for up to 1-5 sizes/types at one time with no change parts
          • Significantly reduces labour time
          • Reduces the risk of human error
          • Compound weight and placement together in one process
          • Barcode label printing and verification on any colour shells
          • A “dimple” detection station is included to identify liner gun 1, giving further detailed traceability for SPC data analysis

          1. Compound Weight

          After the shells have been passed through the “lining” process, the operator will bake the ends in the usual manner and return them to the gauge. Each shell will be automatically identified and weighed again. The barcode verification feature ensures the risk of “mixing” or manual data entry errors are completely removed from the process, and the compound weight will be automatically calculated and displayed for the operator for each shell.

          2. Compound Placement

          After compound weight compound placement can also be checked. This is done by up to 5 optional “uncurling” presses within the gauge, for plants producing different shell diameters and types.

          3. Uncurling

          Once “uncurled” the shells are inspected by up to 5 high resolution cameras as they are rotated through 360 degrees.

          Detailed information on the cut edge distance and HOS (high on shoulder) is provided around the complete shell circumference.

          Torus Recommends

          Our Divisions

          Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

          How can we help you?

            Z307 SEMI-AUTOMATIC BENCH TOP FOOD CAN AXIAL LOAD GAUGE

            Z307 SEMI-AUTOMATIC BENCH TOP FOOD CAN AXIAL LOAD GAUGE

            The Z307 Semi-Automatic Bench Top Axial Load Gauge determines the maximum axial load force that can be applied prior to container failure within a short cycle time.

            Specifications

            The test will begin once top tooling has detected the start of the axial load via the high accuracy mapped load cell, gathering accurate data throughout the inspection routine. Once the can sample has reached the buckle/column strength maximum achievable load, the result will be shown on screen and exported as necessary.

             

            Torus Food Can Gauging

            Food Cans-01

            Measurement Features
            Axial Load – The maximum force at which the container fails/collapses | Accuracy: +/- 10 N

             

            Technical Specification

            • Can Materials | Aluminium
            • Can Stages | Finished, Straight Walled
            • Can Finished Height Range | Typical Range: 87 – 190 mm
            • Can Outer Body Diameter | Typical Range: Ø 211 – Ø 307
            • Axial Load | Typical Range: ≤ 2000 N

             

            Gauge Features

            • Industry standard location patterns for component neck support
            • Selectable crush speed
            • Factory set patterns to ensure parallelism between gauge tooling faces
            • Available for both straight walled and finished food cans
            • Multi-size capability with quick change tooling
            • Short cycle times due to the latest high-performance stepper motors (selectable crush speed)
            • Customer-specific data outputs (kgs, lbf, newtons)
            • High-accuracy axial load cell technology
            • Available for trimmed and finished food and beverage cans

            Torus Recommends

            Our Divisions

            Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

            How can we help you?

              Z341 BENCH TOP FOOD CAN COATING ANALYSER

              Z341 BENCH TOP FOOD CAN COATING ANALYSER

              The Z341 Manual Coating Analyser has been developed to give fast and accurate measurement of the internal lacquer, sprayed during today’s 2 piece can manufacturing process

              Specifications

              By cutting the can to give suitable access, the dome area of the can is able to be checked by the system.

              No “lacquer panels” are required for calibration and measurement data can be exported via on board USB or LAN ports to your factory data acquisition systems where required.

               

              Torus Food Can Gauging

              Food Cans-01

              Measurement Features

              • Internal Lacquer | Accuracy: +/- 0.2 µm | Capability: 0.4 µm
              • Over Varnish | Accuracy: +/- 0.2 µm | Capability: 0.4 µm

               

              Technical Specification

              • Body Diameter | Typical Range: <35 mm ∅

               

              Gauge Features

              • Dual system equipped with two spectrometers
              • Visible light and Near Infrared (NIR) light, enables the OV/over ink inspection
              • Simple, manual positioning by the operator ensure side wall measurements are immediately displayed on the embedded mini touch screen PC
              • Cans from (202) – (307) body diameter can be accommodated by the systems “scissor” action location fingers, operated at the push of a button
              • “Non-contact” means no wear parts, and the use of a non-contact “white light spectroscopy” technique guarantees unprecedented performance

              Torus Recommends

              Our Divisions

              Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

              How can we help you?

                Z606 AUTOMATIC FOOD END SCORE GAUGE

                Z606 AUTOMATIC FOOD END SCORE GAUGE

                The Z606 Automatic Food End Score Gauge has been developed to provide the highest accuracy, repeatability, and usability for the measurement of Score Residual on Food can ends.

                Specifications

                The Gauge uses two proprietary 3D Scanning White Light Interferometry Sensors developed by Torus’ Research & Development team. Each sensor performs a high-resolution area scan of the upper and lower surface of the Score area to build up a full 3D map for analysis and measurement. The sensors combine sub-micron vertical scanning with sub-micron X, Y area scans for unprecedented resolution, resolving up to 2.3 million surface data points for each Score Residual Thickness measurement.

                 

                Torus Shells and Ends

                Beverage Shells and Ends

                 

                Measurement Features

                • Score Residual | Accuracy: +\- <1 micron | Repeatability: <2 microns
                • Score Maximum Residual | Accuracy: +\- <1 micron | Repeatability: <2 microns
                • Score Minimum Residual | Accuracy: +\- <1 micron | Repeatability: <2 microns

                 

                Technical Specification

                • Shell Materials | Aluminium/Steel
                • Component Stages | Food Ends
                • Component End Range | Typical Range: 48-93mm Curl Diameter (113-309)
                • Automation translates to greater labour hours available, improving compliance & increasing your ability to scale.
                • Accurate, repeatable and traceable inspection data superior to traditional methods
                • Removing operator bias, giving you complete confidence in your process control.
                • High level efficiency & productivity, significantly reducing reliance on operator labour due to short cycle inspection times.
                • Significant cost saving offering a fantastic ROI

                1. Ease of Setup

                Simply setup measurement positions using a drag and drop interface on an image of the End to be measured.

                2. Pioneering Technology

                3D Scanning White Light Interferometry Sensors developed by Torus, provide sub-micron resolution and unparalleled detail.

                 

                Bespoke algorithms analyse up to 2.3million data points per scan to provide accurate Score Residual Thickness Measurements.

                3. Results and Feedback

                (a) Mimic Screens provide instant feedback for Pass and Fail.

                 

                (b) Graphical Section plots show the Score profile for lifetime monitoring.

                 

                (c) 3D data available for output to preform detailed analysis and evaluation.

                Torus Recommends

                Our Divisions

                Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                How can we help you?

                  Z704 REMOTEXPLORER CAMERA SYSTEM

                  Z704 REMOTEXPLORER CAMERA SYSTEM

                  Introducing Torus’ Z704 RemoteXplorer, offering remote visual global support from our head office

                  Z704 new 2

                  Remote support has been available for many years via Torus’ global helpdesk team, but only now can ‘eyes on’ support be offered via a new extension of Torus’ traditional GaugeXplorer software. RemoteXplorer, with the permission of customers, the gauges can now be monitored visually using RemoteXplorer’s newly developed pan and tilt camera system and software package.

                  Torus Recommends

                  Our Divisions

                  Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                  How can we help you?

                    STATISTICAL PROCESS CONTROL (SPC) SOFTWARE FOR DATA ACQUISITION​

                    Statistical Process Control (SPC) Software for Data Acquisition

                    Using Industry standard database platforms, SPCXplorer is suitable for single station application, through to full factory database-centric network installations.Statistical Process Control (SPC) software is essential for manufacturing wide quality monitoring. 

                    Upgrade Existing SPC Software Systems

                    With our database migration tools and backward compatibility architecture, users of the previous generation Repro2000 statistical process control software can upgrade with minimal disruption to their daily operation.

                    Designed with the needs of shop-floor data collection in mind, SPCXplorer can be interfaced to a large variety of manual instrumentation via RS232 connectivity, or for more complex gauging systems, can process bespoke ASCII data files via Ethernet.

                    The Reporting module ensures the data is displayed in the right format for your quality reviews, and with its simple and powerful administration functions, access to the management and configuration areas of the software is password protected for assured security.

                    Reliable & Professional SPC Software for Industry – SPCXplorer

                    Statistical Process Control software helps prevent business relative issues before they occur, via the use of data driven quality analysis. This enables you to monitor your production process by utilising visual diagrams such as Control Charts, customers have the ability to create specific control boundaries for all of their process monitoring needs. SPCXplorer detects manufacturing issues before they occur.

                    Using statistical process control software and knowing how efficient your processes are running, helps give the operators valuable information on whether to instigate or adjust their manufacturing processes or whether to carry on with the current process.

                    Want to know more about our SPC software? Contact us today.

                    Torus Recommends

                    Our Divisions

                    Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                    How can we help you?

                      GAUGEXPLORER SOFTWARE

                      GaugeXplorer Software

                      GXP software is fundamental to all Torus Measurement Systems gauges, providing smooth reliable gauge operation, including state of the art intuative diagnostic tools, allowing the operators and our TMS support team easy access to the gauge where ever in the world you are.

                      GXP software has a range of features for your specific industry requirements to help improve productivity & meet quality requirements.

                      • Helping improve productivity, industry specific processes, quality assurance, operator confidence
                      • Advanced customer support (on-line) via our help desk
                      • Continuous optimisation, ensuring we exceed customer expectations with state of the art GXP
                      • Software reliability (customer confidence)
                       

                      Torus Recommends

                      Our Divisions

                      Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                      How can we help you?

                        Z313 AUTOMATIC FOOD CAN ENAMEL RATING GAUGE

                        Z313 AUTOMATIC FOOD CAN ENAMEL RATING GAUGE

                        The Z313 Enamel Rater measures the lacquer integrity of metal food cans boasting a typical throughput speed of 3 food cans per minute, using our unique static fill, rate and extract philosophy. Read More

                        Specifications

                        The Z313 Enamel Rater measures the lacquer integrity of metal food cans. The gauge can be specified for conveyor loaded (automatic) or fully line fed (in-line) operation. Both systems can be specified with Torus’ optional LSM / ISG recognition camera module for colour spray dot identification, ensuring SPC data output is tagged with the relevant traceability for effective remedial actions.

                        Torus Food Can Gauging

                        Food Cans-01

                        Measurement Features
                        Features

                        • Enamel Rating (mA) 0-100 mA | Accuracy: +/- 0.1 mA | R&R: 0.2 mA
                        • Enamel Rating (mA) 100 mA + | Accuracy: +/- 0.5 mA | R&R: 1.0 mA

                         

                        Measurement Features:  Hi-Res (typically for plants running steel cans)
                        Features

                        • Enamel Rating (mA) 0-100 mA | Accuracy: +/- 0.02 mA | R&R: 0.02 mA
                        • Enamel Rating (mA) 100 mA + | Accuracy: +/- 0.1 mA | R&R: 0.2 mA

                         

                        Technical Specification
                        Capabilities

                        • Can Materials | Aluminium (and Hi-Res for steel)
                        • Can Stages | Finished, Straight Walled
                        • Can Finished Height Range | Typical Range: 90 – 205 mm
                        • Can Outer Body Diameter | Typical Range: Ø 211 – Ø 307
                        • Ø 211 – Ø 307 body size capability and NO change parts
                        • Conveyor loaded or in-line operation
                        • ‘Posi-Fill’ system for complete fill speed and level control
                        • Approximately 3 cans per minute throughput
                        • High accuracy ‘rating’ system
                        • In-cycle conductivity monitoring giving customers confidence in their mA results

                        Our modular gauge setups are unique and allow you to customise your gauge as and when you require, giving you the flexibility to ensure you have a total quality solution.

                        1. Start with the standard Z313 Enamel Rating (Metal Exposure) Gauge (2)…
                        2. … add any of the below optional modules at any time.
                        1.  Multi Lane Input Conveyor
                        2. Enamel Rating Module
                        3. Lacquer Distribution Module (Visible/NIR)

                        Torus Recommends

                        Our Divisions

                        Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                        How can we help you?

                          MASTER RE-CALIBRATION FOR METAL PACKAGING SYSTEMS

                          MASTER RE-CALIBRATION FOR METAL PACKAGING SYSTEMS

                          Ensure your product quality is never compromised by utilising Torus’ Master re-calibration service for your gauge masters.

                          Specifications

                          The Beverage Can Master supplied with your gauge is extremely important for the reliability of your measurement results.

                           

                          As the original equipment manufacturer Torus Measurement Systems recommends that your Master is re-calibrated annually to continually assess for wear, damage and integrity. This ensures your product quality is never compromised.

                           

                          Torus are a leading manufacturer in gauging systems for the packaging industry worldwide, with the expertise to understand the functionality and critical features of your master.

                           

                          Torus Measurement Systems Master Calibration Service offers:

                          • ISO 17025 (UKAS approved measurement methods)
                          • ISO 9001 (BSI approved Quality Management System)
                          • Continual commitment to quality
                          • Quick turnaround offering minimum disruption (typical 3 – 5 days)
                          • Value for money
                          • Annual re-call notification when your master is due for calibration (this is driven by our own bespoke software Information Management System) – this notification will be sent to your preferred contact six weeks prior to when your master is due for re-calibration.

                          Torus Recommends

                          Our Divisions

                          Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                          How can we help you?

                            Z340 AUTOMATIC FOOD CAN COATING ANALYSER

                            Z340 AUTOMATIC FOOD CAN COATING ANALYSER

                            The Z340 Automatic Coating Analyser has been developed to give detailed distribution analysis of the internal lacquer on a food can.

                            Specifications

                            The system utilises state-of-the-art non-contact spectroscopy techniques and is suitable for both aluminium and steel can inspection.

                             

                            Torus Food Can Gauging

                            Food Cans-01

                            Measurement Features
                            Feature

                            • Internal Lacquer | Accuracy: +/- 0.2 µm / 0.4 µm

                             

                            Capabilities

                            • Food Can Materials | Aluminium/Steel
                            • Outer Body Diameter | Typical Range: Ø 211 – Ø 307
                            • Trimmed Can Height | Typical Range: 60.00 – 190.00
                            • Finished Can Height | Typical Range: 60.00 – 190.00
                            • Dual system equipped with two spectrometers – Visible Light and Near Infrared (NIR) light, enables both clear and opaque internal lacquers to be inspected
                            • Brand-new fibre setup creating a smaller spot size to optimise positions, ensuring true location of measurement points
                            • Enables monitoring and control of the lacquer distribution
                            • Absolute, not inferred, lacquer thickness measurement
                            • Multi-size capability – no need for change tooling
                            • Traceable measurements to NIST standards

                            The Z340 Automatic Food Can Coating Analyser comes with a Multi-Lane Input Conveyor as standard.

                            Torus Recommends

                            Our Divisions

                            Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                            How can we help you?

                              Z307 AUTOMATIC FOOD CAN DESTRUCTIVE GAUGE

                              Z307 AUTOMATIC FOOD CAN DESTRUCTIVE GAUGE

                              Torus’ Z307 series defines the standard for destructive testing and inspection.

                              Specifications

                              The gauge features fixed-top and mid-wall probe positions for multi-positional radial measurement, with a dedicated caliper to ensure the correct top and mid-wall thickness measurement position every time.

                              The Z307 Automatic Axial Load module determines the maximum axial load force that can be applied prior to container failure within a short cycle time.

                              The Z306 Panel Resistance module provides detailed information about the maximum panel resistance vacuum pressure the can is able to achieve prior to failure.

                               

                              Torus Food Can Gauging

                              Food Cans-01

                              Measurement Features

                              • Axial Load | Accuracy: +/- 10 N
                              • Panel Resistance | Accuracy: +/- .05 PSI

                               

                              Technical Specification

                              • Can Materials | Aluminium/Steel
                              • Can Stages | Finished, Straight Walled
                              • Can Finished Height Range | Typical Range: 87 – 190 mm
                              • Can Outer Body Diameter | Typical Range: Ø 211 – Ø 307
                              • Axial Load | Typical Range: ≤ 2000 N

                               

                              Gauge Features

                              • Available for both straight walled and finished food cans
                              • Industry standard location patterns for component neck support and to ensure parallelism between gauge tooling faces
                              • Selectable crush speed
                              • Z307: Multi-size capability with no change tooling
                              • Z307: Short cycle times
                              • Z307: Customer-specific data outputs (kgs, lbf, newtons etc)
                              • Z307: High accuracy axial load technology
                              • Z306: Multi-size capability with no change tooling
                              • Z306: Customer-specific data outputs (psi, kpa, lbs etc)
                              • Z306: High accuracy pressure sensor technology

                              The Z307 Destructive Food Can Gauge comes with the following modules as standard.

                              1.  Multi Lane Input Conveyor
                              2. Z307 Axial Load Module
                              3. Z306 Panel Resistance Module

                              Torus Recommends

                              Our Divisions

                              Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                              How can we help you?

                                Z304 AUTOMATIC FINISHED FOOD CAN INSPECTION GAUGE

                                Z304 AUTOMATIC FINISHED FOOD CAN INSPECTION GAUGE

                                The gauge features high-precision transducer technology, using dedicated probe contact for accurate, reliable and traceable measurement of your finished cans.

                                Specifications

                                An additional option is available for component rotation to enable additional radial measurement positions, giving you significantly increased measurement data allowing increased data analysis for instant process control.

                                 

                                Torus Food Can Gauging

                                Food Cans-01

                                Measurement Features

                                • Flanged Can Height | Accuracy: +/- 0.010 mm
                                • Finished Can Height | Accuracy: +/- 0.010 mm
                                • Flange Width | Accuracy: +/- 0.010 mm
                                • Bead Depth | Accuracy: +/- 0.010 mm
                                • Roll Bead Diameter | Accuracy: +/- 0.010 mm
                                • Roll Bead Position | Accuracy: +/- 0.025 mm
                                • Bead Symmetry | Accuracy: +/- 0.025 mm

                                 

                                Technical Specification

                                • Can Range | Typical Range: Ø 211 – Ø 307 body diameters
                                • Can Materials | Aluminium/Steel
                                • Can Height Range | Typical Range: 87 – 210 mm
                                • Can Flange Width Range | Typical Range: 1.5 – 2.5 mm
                                • Can Internal Neck Diameter Range | Typical Range: Ø 200 – Ø 209 body diameters
                                • Speed and accuracy
                                • Confidence in your production process
                                • Modular concept to cater for future upgrades
                                • Cost-effective upgrade path for additional modules to be added
                                • Fully automated, removing operator bias
                                • In-line ready. Ideal for wall-to-wall plants, significantly increasing throughput and data collection

                                Our modular gauge setups are unique and allow you to customise your gauge as and when you require, giving you the flexibility to ensure you have a total quality solution.

                                1. Start with the standard Z304 Finished Food Can Back End Inspection Gauge…
                                2. … add any of the below optional modules at any time.
                                1.  Multi Lane Input Conveyor
                                2. In-Cycle Calibration/Auto Can Rotation
                                3. Finished Can Weight Module
                                4. Axial Load Module
                                5. Panel Resistance Module
                                6. Lacquer Distribution Module (Visible/NIR)
                                7. Enamel Rating Module

                                Torus Recommends

                                Our Divisions

                                Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                                How can we help you?

                                  Z303 AUTOMATIC TRIMMED FOOD CAN INSPECTION GAUGE

                                  Z303 AUTOMATIC TRIMMED FOOD CAN INSPECTION GAUGE

                                  The gauge features fixed-top and mid-wall probe positions for multi-positional radial measurement, with a dedicated caliper to ensure the correct top and mid-wall thickness measurement position every time.

                                  Specifications

                                  The proven contact measurement technology ensures accurate, reliable and traceable measurement 24/7.

                                   

                                  Torus Food Can Gauging

                                  Food Cans-01

                                  Measurement Features

                                  • Mid Wall Thickness | 1-16 positions | Accuracy: +\- 0.001 mm
                                  • Top Wall Thickness | 1-16 positions | Accuracy: +\- 0.001 mm
                                  • Trimmed Can Height | 1-16 positions | Accuracy: +\- 0.010 mm
                                  • Panel Depth | 1-16 positions | Accuracy: +\- 0.010 mm
                                  • Countersink | 1-16 positions | Accuracy: +\- 0.025 mm

                                   

                                  Technical Specification

                                  • Can Range | Typical Range: Ø 202 – Ø 307 body diameters
                                  • Can Materials | Aluminium/Steel
                                  • Can Height Range | Typical Range: 87 – 210 mm
                                  • Can Dome Depth Range | Typical Range: 9 – 13 mm
                                  • Can Wall Thickness Range | Typical Range: 0 – 1 mm
                                  • Can Body Diameter Range | Typical Range: Ø 202 – Ø 307 body diameters
                                  • Speed and accuracy
                                  • Confidence in your production process
                                  • Modular concept to cater for future upgrades
                                  • Cost-effective upgrade path for additional modules to be added
                                  • Fully automated, removing operator bias
                                  • In-line ready. Ideal for wall-to-wall plants, significantly increasing throughput and data collection

                                  Our modular gauge setups are unique and allow you to customise your gauge as and when you require, giving you the flexibility to ensure you have a total quality solution.

                                  1. Start with the standard Z303 Trimmed Food Can Inspection Front End Gauge…
                                  2. … add any of the below optional modules at any time.
                                  1.  Multi Lane Input Conveyor
                                  2. Additional Options
                                  3. Trimmed Can Weight Module
                                  4. Axial Load Module

                                  Torus Recommends

                                  Our Divisions

                                  Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                                  How can we help you?

                                    Z303 AUTOMATIC UNIVERSAL (TRIMMED AND FINISHED) FOOD CAN INSPECTION GAUGE

                                    Z303 AUTOMATIC UNIVERSAL (TRIMMED AND FINISHED) FOOD CAN INSPECTION GAUGE

                                    The Universal Trimmed and Finished Food Can Inspection Gauge from Torus Measurement Systems defines the standard for dimensional inspection of food cans.

                                    Specifications

                                    The gauge features fixed-top and mid-wall probe positions for multi-positional radial measurement, with a dedicated caliper to ensure the correct top and mid-wall thickness measurement position every time.

                                     

                                    Torus Food Can Gauging

                                    Food Cans-01

                                    Measurement Features

                                    Trimmed Can Features

                                    • Mid Wall Thickness | 1-16 positions | Accuracy: +\- 0.001 mm
                                    • Top Wall Thickness | 1-16 positions | Accuracy: +\- 0.001 mm
                                    • Trimmed Can Height | 1-16 positions | Accuracy: +\- 0.010 mm
                                    • Panel Depth | 1-16 positions | Accuracy: +\- 0.010 mm
                                    • Countersink | 1-16 positions | Accuracy: +\- 0.025 mm

                                     

                                    Finished Can Features

                                    • Flanged Can Height | Accuracy: +/- 0.010 mm
                                    • Finished Can Height | Accuracy: +/- 0.010 mm
                                    • Flange Width | Accuracy: +/- 0.010 mm
                                    • Bead Depth | Accuracy: +/- 0.010 mm
                                    • Roll Bead Diameter | Accuracy: +/- 0.010 mm
                                    • Roll Bead Position | Accuracy: +/- 0.025 mm
                                    • Bead Symmetry | Accuracy: +/- 0.025 mm
                                    • Panel Resist | Accuracy: +/- 0.5 PSI

                                     

                                     

                                    Technical Specification

                                    Trimmed Can Capabilities

                                    • Can Range | Typical Range: Ø 211 – Ø 307 body diameters
                                    • Can Materials | Aluminium/Steel
                                    • Can Height Range | Typical Range: 87 – 210 mm
                                    • Can Dome Depth Range | Typical Range: 9 – 13 mm
                                    • Can Wall Thickness Range | Typical Range: 0 – 1 mm
                                    • Can Body Diameter Range | Typical Range: Ø 202 – Ø 307 body diameters

                                     

                                    Finished Can Capabilities

                                    • Can Range | Typical Range: Ø 202 – Ø 307 body diameters
                                    • Can Materials | Aluminium/Steel
                                    • Can Height Range | Typical Range: 87 – 210 mm
                                    • Can Flange Width Range | Typical Range: 1.5 – 2.5 mm
                                    • Can Internal Neck Diameter Range | Typical Range: Ø 200 – Ø 209 body diameters
                                    • Speed and accuracy
                                    • Confidence in your production process
                                    • Modular concept to cater for future upgrades
                                    • Cost-effective upgrade path for additional modules to be added
                                    • Fully automated, removing operator bias
                                    • Trimmed and finished can inspection in one cabinet saves operator time, resource and space

                                    Our modular gauge setups are unique and allow you to customise your gauge as and when you require, giving you the flexibility to ensure you have a total quality solution.

                                    1. Start with the standard Z303 Trimmed Food Can Gauge (2) and the Z304 Finished Food Can Gauge (3)
                                    2. … add any of the below optional modules at any time.
                                    1.  Multi Lane Input Conveyor
                                    2. Additional Options
                                    3. In Cycle Calibration/Auto Can Rotation
                                    4. Trimmed and Finished Can Weight Module
                                    5. Axial Load Module
                                    6. Panel Resistance Module
                                    7. Lacquer Distribution Module (Visible/NIR)
                                    8. Enamel Rating Module

                                    Torus Recommends

                                    Our Divisions

                                    Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                                    How can we help you?

                                      Z312 VISION MODULE

                                      Z312 VISION MODULE

                                      The Z312 Vision Module tests for all industry standard ISG recognition, including UV/BRC presence in one system.

                                      Specifications

                                      The Z312 Vision Module quickly identifies the application of UV base rim coat presence, indicating in split seconds a percentage coverage based on parameters set within Torus’ GaugeXplorer software. The live report instantly denotes if the rim coat has either been under applied or damaged.

                                       

                                      Designed with flexibility in mind the Z312 module can be integrated into any new or existing Torus gauge, or alternatively supplied as a standalone system. The flexible module boasts multi size capability with no change parts allowing the system to be located anywhere on the shop floor.

                                       

                                      Torus Beverage Can Gauging

                                       

                                      Gauge Features

                                      UV Base Rim Coat Presence (BRC)

                                       

                                      • Visible Spray Dot

                                      • UV Spray Dot

                                      • 2 & 5 Digit Dot Matrix Character Code (Visible/UV)

                                      UV Ink Dot & Character Recognition – Key Features:

                                      UV Base Rim Coat (BRC) – Key Features:

                                      The Z312 works together with and complements Torus’ Z340 Coating Analyser to provide Base Rim Coat Distribution Analysis, aimed to show operators how the BRC is distributed and thus showing up any potential areas to save resource.

                                      NEW
                                      • Helps eliminate hazards from the manual abrasive copper sulphate checks typically carried out to measure rim coat
                                      • Significantly reduces labour time
                                      • Increases operator productivity
                                      • Overcomes human error
                                      • Improved can mobility with can production and filling lines running at 2000+ per minute
                                      • Reducing HFI (Hold for Inspection) customer complaints

                                      Torus Recommends

                                      Our Divisions

                                      Through our four key divisions we deliver a range of measurement and inspection systems, metrology services, manufacturing services and machine enclosure solutions, as well as our online store for aluminium profile components and workspace solutions.

                                      How can we help you?